Made of epoxy resin. It contains excellent chemical resistance, mechanical property, corrosion resistance, electrical insulation and indoors decorative protection. No primer or chemical pretreatment is needed before application and normally sand-blasting is only required. Not recommended for general exterior coating.

 Types Available:

Full-Glossy(≥80%), Semi-gloss (50-80%), semi-matt(20-50%),  matt(≤20%) and special-effect types.

 Applications:

It is mainly used in petroleum-pipeline, gas-pipeline water-pipeline, electrical machine, electrical cabinet, instrument and meter, car parts and household appliances.

 Properties:

 Curing Condition:

Type-A (full-gloss and semi-gloss):  180°C, 15 min.  ;  Type-B (semi-matt and matt):  140°C, 15 min.

Cured Membrane Properties:

 Packaging:

PE lined paper box. Net weight 20Kg.

 Average Spread Rate:

9-12M²/Kg, thickness 60-80um (calculated as 100% powder).

 Storage: Store below 35℃ in dry, venting, clean indoor, keep away from fire, heating, and with coverage.

The powder can be stored stably for 12 months. When exceeding 12 months, it must be tested before use.

 Precaution:

This powder coating is a non-toxic product. The inhalation should be avoided in handling. The operators are suggested to equipped with dust mask and glasses. If possible, avoid a prolonged contact with skin.

Others:

This Technical Data Sheet is only for customers’ reference. The specific data are tested in a certain condition and represent the classic characteristics of this product.